Appletalk Menu; Standard Usb Menu - Dell B3460dn User Manual

Understanding the printer menus
Use
View Security Mode

AppleTalk menu

Note: This menu is available only in printer models connected to a wired network or when an optional network card
is installed.
To access the menu, navigate to any of the following:
•
Network/Ports > Standard Network > Standard Network Setup > AppleTalk
• Network/Ports > Network Setup [x] > AppleTalk
Use
Activate
Yes
No
View Name
View Address
Set Zone
[list of zones available on the network]

Standard USB menu

Use
PCL SmartSwitch
On
Off
PS SmartSwitch
On
Off
To
View the encryption method for the wireless network.
To
Enable or disable AppleTalk support.
Note: Yes is the factory default setting.
Show the assigned AppleTalk name.
Note: The name can be changed only from the Embedded Web Server.
Show the assigned AppleTalk address.
Note: The address can be changed only from the Embedded Web Server.
Provide a list of AppleTalk zones available on the network.
Note: The factory default setting is the default zone for the network. If no
default zone exists, then the zone marked with an asterisk (*) is the default
setting.
To
Set the printer to automatically switch to PCL emulation when a print job received
through a USB port requires it, regardless of the default printer language.
Notes:
•
On is the factory default setting.
• When set to Off, the printer does not examine incoming data. The printer uses
PostScript emulation if the PS SmartSwitch is set to On. It uses the default
printer language specified in the Setup menu if the PS SmartSwitch is set to
Off.
Set the printer to automatically switch to PS emulation when a print job received
through a USB port requires it, regardless of the default printer language.
Notes:
•
On is the factory default setting.
•
When set to Off, the printer does not examine incoming data. The printer uses
PCL emulation if the PCL SmartSwitch is set to On. It uses the default printer
language specified in the Setup menu if the PCL SmartSwitch is set to Off.
66