Installing An Optional Card - Dell B3460dn User Manual

Additional printer setup
3
Align the notch (1) on the memory card with the ridge (2) on the connector.
4
Push the memory card straight into the connector, and then push the card toward the controller board wall until
it clicks into place.
5
Close the controller board access door.
Note: When the printer software and any hardware options are installed, it may be necessary to manually add the
options in the printer driver to make them available for print jobs. For more information, see
options in the print driver" on page

Installing an optional card

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have other devices attached to the printer, then turn them
off as well, and unplug any cables going into the printer.
1
21.
1
2
2
"Adding available
15