Dell B3460dn User Manual page 74

Hide thumbs Also See for B3460dn:
Table of Contents

Advertisement

Understanding the printer menus
Use
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Max Auto Reboots
1–20
Print Recovery
Auto Continue
Disabled
5–255 sec
Print Recovery
Jam Recovery
On
Off
Auto
Print Recovery
Jam Assist
On
Off
Print Recovery
Page Protect
Off
On
Press Sleep Button
Do nothing
Sleep
Hibernate
Press and Hold Sleep Button
Do nothing
Sleep
Hibernate
To
Set the printer to restart when an error is encountered.
Notes:
Reboot always is the factory default setting for Auto Reboot.
2 is the factory default setting for Max Auto Reboots.
If the printer performs the same number of automatic
reboots that is set in the printer within a certain amount of
time, then the printer shows the applicable error instead of
rebooting.
Let the printer automatically continue printing from certain offline
situations when these are not resolved within the specified time
period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Notes:
Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
On sets the printer to always reprint jammed pages.
Off sets the printer to never reprint jammed pages.
Notes:
On is the factory default setting. This sets the printer to
automatically dump or partially printed pages to the
standard bin after a jammed page has been cleared.
Off requires the user to remove all pages from all possible
jam locations.
Let the printer successfully print a page that may not have printed
otherwise.
Notes:
Off is the factory default setting. This prints a partial page
when there is not enough memory to print the whole page.
On sets the printer to process the whole page so that the
entire page prints.
Determine how the printer, while in idle state, reacts to a short
press of the Sleep button.
Note: Sleep is the factory default setting.
Determine how the printer, while in idle state, reacts to a long press
of the Sleep button.
Note: Do nothing is the factory default setting.
74

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents