Ducati Scrambler Owner's Manual page 90

Entering the PIN CODE
To activate the PIN CODE function and enter your
own PIN CODE you must open the Setting MENU.
Select PIN CODE option, by pressing button (1) or (2).
Once function is highlighted, press CONFIRM MENU
button (4).
Note
If upon accessing this function, the "O : " (Old)
indication is displayed together with four flashing
dashes "- - - -", a PIN code is already stored and the
Function is already active.
When accessing the function, the display will show
"N:" (new) followed by four flashing dashes "- - - -".
To go back to the previous screen without activating
any PIN CODE, press button (2); as soon as the "EXIT"
box starts flashing, press button (4) again.
Entering the code:
1) Press button (4), one digit starts flashing
indicating "0";
2) Each time you press the button (2) the displayed
number increases by one (+ 1) up to "9" and then
starts back from "0";
88
3) Each time you press the button (1) the displayed
number decreases by one (- 1) up to "1" and then
starts back from "0";
4) To confirm the number, press the button (4);
Repeat the procedures until you confirm all the four
digits of the PIN CODE.