Table of Contents
Advertisement
ELI-ECO3-CVIM-16
Please refer to the following sheet for front panel button information.
SN
1
2
Alarm
3
NET
3
HDD
5
IR
6
ESC
7
FN
8
Enter
9
、
、
Icon
Name
USB port
Alarm indicator light
Network abnormal
indicator light
HDD abnormal
indicator light
IR Receiver
ESC
Assist
ENTER
Power button
Up
Down
Left
Right
Figure 2-2
Function
To connect USB storage device, USB mouse and
etc.
When an alarm occurs, the light becomes red to
alert you.
Network error occurs or there is no network
connection, the light becomes red to alert you.
HDD error occurs or HDD capacity is below
specified threshold value, the light becomes red
to alert you.
It is to receive the signal from the remote
control.
Go to previous menu, or cancel current
operation.
When playback, click it to restore real-time
monitor mode.
One-window monitor mode, click this button to
display assistant function: PTZ control and image
color.
Backspace function: in numeral control or text
control, press it for 1.5seconds to delete the
previous character before the cursor.
In motion detection setup, working with Fn and
direction keys to realize setup.
In text mode, click it to switch between numeral,
English character(small/capitalized) and etc.
Realize other special functions.
Confirm current operation
Go to default button
Go to menu
Power button, press this button for three seconds
to boot up or shut down DVR.
Activate current control, modify setup, and then
move up and down.
Increase/decrease numeral.
Assistant function such as PTZ menu.
Shift current activated control,
When playback, click these buttons to control
playback bar.
Advertisement
Table of Contents
