Table of Contents
Advertisement
5.8.2.6 DDNS
The DDNS interface is shown as in Figure 5-27.
The DDNS is to set to connect the various servers so that you can access the system via the server.
Please go to the corresponding service website to apply a domain name and then access the system via
the domain. It works even your IP address has changed.
Please select DDNS from the dropdown list (Multiple choices). Before you use this function, please
make sure your purchased device support current function.
Please refer to the following sheet for detailed information.
Parameter
Server Type
Server IP
Server Port
Domain Name
User
Password
Update period
Quick DDNS and Client-end Introduction
1) Background Introduction
Device IP is not fixed if you use ADSL to login the network. The DDNS function allows you to access the
DVR via the registered domain name. Besides the general DDNS, the quick DDNS works with the
device from the manufacturer so that it can add the extension function.
2) Function Introduction
The quick DDNS client has the same function as other DDNS client end. It realizes the bonding of the
domain name and the IP address. Right now, current DDNS server is for our own devices only. You
Figure 5-26
Figure 5-27
Function
You can select DDNS protocol from the dropdown list and then
enable DDNS function.
DDNS server IP address
DDNS server port.
Your self-defined domain name.
The user name you input to log in the server.
The password you input to log in the server.
Device sends out alive signal to the server regularly.
You can set interval value between the device and DDNS server
here.
175
Advertisement
Table of Contents
