eLine ELI-ECO3-CVIM-4 User Manual page 103


Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.

Date separator: There are three denotations to separate date: dot, beeline and solidus.

DST: Here you can set DST time and date. Here you can set start time and end time by setting
corresponding week setup or by setting corresponding date setup.

NTP: It is to set NTP server information.
4.10.5.1.3 Holiday
Holiday setup interface is shown as in Figure 4-100. Click Add new holiday button, you can input new
holiday information. See Figure 4-101. Here you can set holiday name, repeat mode and start/end time.
Note

When you enable Holiday settings and schedule setup at the same time, holiday setting has the
priority. If the selected day is a holiday, then system records as you set in holiday s etting. If it is not
a holiday, system records as you set in Schedule interface. Please note

Please note, there is no year setup on the holiday setup. For example, if you set 30th Oct, 2012 as
a holiday, then the date of 30th Oct in each year will be set as a holiday.
Figure 4-99
146