Table of Contents
Advertisement
Please refer to the following sheet for detailed information.
Parameter
Enable tour
Interval
Split
Motion
tour/Alarm
tour
5.8.5.2.3 Zero Channel
The zero-channel interface is shown as in Figure 5-65. Here you can enable zero-channel function and
set corresponding information.
Please refer to the following sheet for detailed information.
Parameter
Enable
Compression System supports H.264.
Resolution
Figure 5-64
Function
Check the box here to enable tour function.
Here is for you to adjust transparency. The value ranges from 5 to
120s. The default setup is 5s.
Here you can set window mode and channel group. System can
support 1/4/8-window according to device channel amount.
Here you can set motion detect tour/alarm tour window mode.
System supports 1/8-window now.
Figure 5-65
Function
Check the box here to enable zero-channel function.
Please select from the dropdown list. System supports
D1/CIF/QCIF and etc.
196
Advertisement
Table of Contents
