eLine ELI-ECO3-CVIM-4 User Manual page 151

5.8.5.1.2 Date and time
The date and time interface is shown as in Figure 5-61
Please refer to the following sheet for detailed information.
Parameter
Date format
Time
Format
Time zone
System
time
Sync PC
DST
NTP
NTP server
Port
Interval
5.8.5.1.3 Holiday Setup
Holiday setup interface is shown as in Figure 5-62.
Here you can click Add box to add a new holiday and then click Save button to save.
Figure 5-61
Function
Here you can select date format from the dropdown list.
There are two options: 24-H and 12-H.
The time zone of the device.
It is to set system time. It becomes valid after you set.
You can click this button to save the system time as your PC current
time.
Here you can set day night save time begin time and end time. You
can set according to the date format or according to the week
format.
You can check the box to enable NTP function.
You can set the time server address.
It is to set the time server port.
It is to set the sync periods between the device and the time server.
194