Table of Contents
Advertisement
Delete: Click it to remove selected channel group.
Move up: Click it to move current selected channel up.
Move down: Click it to move current selected channel down.
Default: Click it to restore default setup.
Tips:
Use mouse or Shift button to switch
funciton is enabled and
On the navigation bar, click
4.10.5.2.3 Zero-channel Encoding
Click zero-channel encoding button, you can go to the following interface. See Figure 4-104.Here you
can enable and set zero-channel encoding function so that you can view several video sources at one
channel.
Enable: This function is disabled by default. Check the box here to enable this function so that you
can control the zero-channel encoding function at the WEB.
Compression: System default setup is H.264. You can set according to device capability.
Resolution: The resolution value may vary due to different device capabilities. Please select from
the dropdown list.
Frame rate: The frame rate value may vary due to different device capabilities. Please select from
the dropdown list.
Bit Rate: The bit rate value may vary due to different device capabilities and frame rate setups.
Please select from the dropdown list.
Save: Click the Save button to save current setup. If this function is disabled, you can not operate
zero-channel encoding function at the WEB, the video is black or null even you operate when the
and
button to enable /disable tour.
meas tour funciton is disabled.
or
to enable/disable tour function.
Figure 4-103
means the tour
149
Advertisement
Table of Contents
