Related Manuals for eLine ELI-SIP-NVR4-POE
Summary of Contents for eLine ELI-SIP-NVR4-POE
- Page 1 NETWORK VIDEO RECORDER Connect Auto Detect Record Product Made in China under ISO9001 & ISO1400 standards 01.BSM.13.2000006 Manual Printed in China v1.0...
-
Page 2: Table Of Contents
Contents About this document About this document ....................i Purpose 1 Preface ........................1 This document is for Network Video Recorders, including the product features, 1.1 Important note ........................ 1 hardware installation, network access, network configuration, daily maintenance, and troubleshooting. 1.2 About this manual...................... -
Page 3: Preface
10.3 Live Video ........................49 10.4 Playback ........................50 10.5 Alarm Search ......................52 10.6 NVR setup ........................52 10.7 Network Camera setup ....................53 Preface 11 NVRClient Access NVR ..................54 11.1 Start and Run ......................54 1.1 Important note 11.2 Login .......................... -
Page 4: Check The Installation Environment
1.3 Check the installation environment Installation environment Specification Before installing the device, checking the environment according to the Table 1-1 Installation environment check items Check item standard System Moisture-resistant The relative environment humidity must be in the range from 5% to 95%. If the humidity is higher than 95%, a dehumidifier Industrial embedded CPU must be installed, such as an air conditioner with the dehumidification function or a dedicated. -
Page 5: Nvr Networking Solutions
Two external-swappable hard disk , maximum 2x4TB hard drive supported Audio In / Out 3.5mm linear audio output Audio formats G711_A，G711_U Network NVR Networking solutions Transmission control Embedded network bandwidth adaptive flow control technology. This the NVR has 5 Ethernet ports, one is RJ45 without POE, others is POE supported ports. -
Page 6: Installation
Step 2 Fixed hard disk as shown in Figure 4-3, using supplied screws. Figure 4-3 fixed hard Installation 4.1 Hard disk recommended Given the current market of different brands, the uneven quality of the different models of hard, recommended to use Seagate or Western Digital brands which are designed for security/server applications offering 24x7 reliable operation. -
Page 7: Front Panel Description
4.5 Rear panel description Operation instruction Figure 4-6 shows the rear panel of the Network Video recorders. Table 4-2 shows the 4.4 Front panel description interface of rear panel. Figure 4-6 Rear panel Figure 4-5 shows the front panel of the Network Video recorders. Table 4-1 shows the description of front panel. -
Page 8: First Boot
When an exception occurs when the device self-test, this interface will stay in the lower Name Description right of the screen, you can choose to continue or shutdown. If you choose to continue, RST button Restores the factory default settings. 5 second holds the device will continue to start, until the device login screen is shown. -
Page 9: Displayer Resolution Adjustment
Figure 4-8 Shutdown interface Figure 4-9 Adjust displayer 4.8 Displayer resolution adjustment Step 2 Choose the type of resolution in the resolution of the drop-down box. NVR support resolutions with VGA 1024*768, VGA 1280*1024, VGA1600*1200, Device will automatically switch to the selected resolution and show the dialog for Yes HDMI720P, HDMI1080P, you can select the proper resolution according your or Cancel. -
Page 10: Add Network Cameras
4.9 Add Network cameras Figure 4-10 Login screen This NVR allow to connect maximum 4 pcs network cameras. NVR maximum support to connect 4 pcs 1080P/720P/ D1 resolution When Add HD IP camera, it can be added by reduction the number of channel or the camera baud rate. -
Page 11: Quick Configuration
When the manual mode is selected, click Button for time synchronization. Select automatic synchronization mode, time synchronization automatically by NVR, this means all cameras will have internal times set to match NVR time. Area 2：Manage cameras certification account. Quick configuration Quickly configure some common functions together to facilitate the configuration Can only certification through the camera to normal use, be sure to add the correct management of the NVR. - Page 12 Modify hard disk group. Modify the name of the network camera. (Normal, abnormal, unformatted drive or does not exist) to view the status of the Enter the desired name of the device corresponds to the name of the bar, you can disk.
-
Page 13: Live Video
5. Click the desired modification motion detection, motion detection alarm dialog pops up. 6. If the motion detection alarm, you must set the arming time and detection area. Live video Input the username and password, click login. Enter the live video interface, which looks like Figure 4-15. Figure 4-15 Live video interface In the live video interface, you can select the camera from the left list to the live video channel to do the below operates:... - Page 14 Decoding ability Items Name Content This system decoding ability is 6 channels D1 or 1 channel 720p or 1 channel 1080p. If Bottom it is over loaded, then it will print out “Decoding ability not enough” on the screen menu showing area.
-
Page 15: Playback
Figure 4-16 PTZ Control menu Playback 7.1 Recording playback Recording playback will play back the video which is recorded in local HD. Like Figure 4-18 showing. Figure 4-18 Local playback PTZ Control menu only can be cooperate with IPS Dome and Ext PTZ platform. Click button to close the PTZ configuration menu. -
Page 16: Recording Backup
Figure 4-20 Backup path browser 、 You can select the date period at the calendar. Click icon to switch month, 、 click to switch year. Means selected date. When it is green marked means this day have recording files, otherwise there is none recording in that day. Step 5 Recording show. - Page 17 10. Double click go into the network disc path list, select the backup path, click ok Figure 4-23 File search button save and exit. USB Storage device 1. Insert U disk or removable HDD to the USB interface. 2. NVR will detect the USB storage device automatically, after detected successfully, it will showing USB storage device.
-
Page 18: Alarm Searching
After we selected the device and date, we can try to play the alarm recording files below type area. Step 17 Alarm triggers recording play. Alarm searching Select the alarm trigger recording files, click button to start playing. Step 18 Alarm recording backup Select the recorded files and click backup button to make backup files. -
Page 19: Setup
Hardware Version Channel Qty Disk Qty Setup Only Device Name can be edit, other parameters can’t be edit. When device update the device info will auto update as well and will keep same step with the software version. Setup includes NVR setup and camera setup. - Page 20 Figure 4-27 Add IP section. Step 21 Click button to call the interface as Figure 4-29. Figure 4-29 Add camera management 15. Input the Begin IP address and End IP address and Port number. 16. Click Apply to finish the operation. 17.
- Page 21 Figure 4-30 System warning information. Figure 4-31 Network interface Step 27 Configure the network parameters, reference the Table 4-4. Warning information searching steps. Table 4-4 Network parameters Step 23 Select the warning type (Disk Alarm, Record Alarm, All). Step 24 Items Introduction How to configure...
- Page 22 Step 31 Edit current layout Input the New layout name Step 32 Configure the New layout position, you can select the Shared layout or my layout. Create New layout The steps to create new layout below: Shared layout means the layout for all the users. Step 29 NVR Setup>...
- Page 23 Step 38 Enable the record (Enable as Default) Figure 4-36 Schedule record configuration Step 39 Please select “√” on the cameras which you want to record, and also select the corresponding streams parameters. Step 40 Click to More Call the record policy configuration interface like Figure 4-35. Figure 8-11 Record Policy Configuration Figure 4-35 Schedule record configuration interface.
-
Page 24: Account Management
9.1.7 Storage policy Playback Backup In storage policy interface, you can do the following operates: Alarm search Check the current HDD status. System Management Check the HDD information details; include HDD capacity, free space. ... -
Page 25: Camera Management
30. Click Delete to call the Delete Privileges Group interface. 36. Configure the user password and privilege group. 31. Click yes to return to the original interface. 37. Click Apply to finish the user adding configuration. 32. Click Apply to finish the operation. ... -
Page 26: Web Browser Access Nvr
10.2 Operation Read 10.2.1 Player NVR Web Video function needs Adobe Flash Player to support, If not install the Adobe Web Browser Access NVR Flash Player or the player version is too low then it can’t play the Video show in Figure 4-42. -
Page 27: Live Video
So NVR Web will adjust Video ability according the user login .when user login the Figure 4-46 set user video ability right and bottom will show a message as Figure 4-44. Figure 4-44 User Video ability information interface Click the Online Users on the Web will enter the online users interface .from there we can see all online use’s video ability show as Figure 4-45. -
Page 28: Playback
10.4 Playback Figure 4-48 Playback You can play back the video by Playback interface. Operation Steps Step 55 Click Playback to enter the playback interface show in Figure 4-48 . Step 56 Select the camera that need to playback. Click the camera of list, means device was chosen, means device was not chosen. -
Page 29: Alarm Search
(Detail setting please refer to 8.1 NVR setup) 10.5 Alarm Search Figure 4-50 NVR setup interface Click the Alarm Search inter the alarm management interface show in Figure 4-49. Figure 4-49 Alarm search 10.7 Network Camera setup Click the Network Camera Setup on the Web enter the camera configure interface shows in Figure 4-51. -
Page 30: Nvrclient Access Nvr
11.3 System main interface After enter the correct user name and password: click Login to system main interface show in Figure 4-53. Figure 4-53 main interface NVRClient Access NVR Operation condition You have installed NVRClient already. 11.1 Start and Run If you have installed NVMS please run it by this icon to the Login interface. - Page 31 Figure 4-54 Accounts interface Click the Search button ,then Scan to search the NVR with same LAN .Or Click Add to add the NVR by IP address 11.4.3 Live Video Layout Modify the Layout by customize . Step 68 Select Device manager->NVR management->Live Video Layout show in Figure 4-56 Figure 4-56 Live Video Layout Step 65 Enter the user name and password, and click Apply to save.
-
Page 32: Live Video And Playback
Step 71 Click OK to save . Figure 4-59 System Tip 11.4.4 System Warning To check the Alarm information. Step 72 Select System Management->System Warning , show in Figure 4-58 Figure 4-58 System Warning 11.5 Live Video and Playback NVRClient can remote Live view/playback the NVR recording video. 11.5.1 Live Video Step 73 Select the NVR ,and select the Type Click Live Video... -
Page 33: A.q
11.5.2 Playback Click Playback to inter Playback interface. Step 1 choose the camera F.A.Q Step 2 choose the date,If there is recording it will be green ,Click the date 1. Why stop the device self-test interface does not move? You can be processed in accordance with the following methods: Step 3 Click Play show in Figure 4-61 .