Table of Contents
Advertisement
Quick Links
TX-SDI-50
TX-SDI-50 & RX-SDI-50
TX-SDI-50 WyreStorm HDMI Over SDI Dual
Output Transmitter with 2-Way IR, RS232
(50m/164ft)
Please read these instructions carefully before installing to avoid complications later.
Technical Support: support@wyrestorm.com
RX-SDI-50 WyreStorm HDMI Over SDI
Cascading Receiver with 2-Way IR, RS232
(50m/164ft)
Instruction Manual
Thank you for choosing this WyreStorm product.
US: +1 901 384 3575
RX-SDI-50
EMEA: +44 (0) 1793 230 343
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Wyrestorm TX-SDI-50
Summary of Contents for Wyrestorm TX-SDI-50
- Page 1 TX-SDI-50 RX-SDI-50 TX-SDI-50 & RX-SDI-50 TX-SDI-50 WyreStorm HDMI Over SDI Dual RX-SDI-50 WyreStorm HDMI Over SDI Output Transmitter with 2-Way IR, RS232 Cascading Receiver with 2-Way IR, RS232 (50m/164ft) (50m/164ft) Instruction Manual Thank you for choosing this WyreStorm product. Please read these instructions carefully before installing to avoid complications later.
-
Page 2: Table Of Contents
Product Service to receive transmissions of 1080p HD video, HD audio and bidirectional IR and serial control from compatible Mail In Service transmission device, such as TX-SDI-50, as part of an HDMI over SDI distribution. Warranty i. Warranty Limits and Exclusions... -
Page 3: Features
HDMI signal the unit is adequately ventilated. overheating, do not cover the unit or obstruct ventilation • TX-SDI-50: Dual SDI outputs on transmitter provides • HDMI v.1.3 openings with material, newspaper, cardboard or two synchronous feeds that enables signal to be split 3. -
Page 4: Package Contents
Package Contents • 1 x TX-SDI-50 Transmitter / 1 x RX-SDI-50 Receiver • 1 x Printed user manual for both models - also downloadable from product web page NOTE: each package contains a single unit NOT both • 2 x 5V/3A DC power supplies (1 per unit) units - transmitters (TX-SDI-50) and receivers (RX-SDI-50) •... -
Page 5: Panel Descriptions
Panel Descriptions TX-SDI-50 Transmitter Power input 5V/3A DC EDID switch LED Power indicator USB port for firmware upgrade RS232 port IR TX emitter for source connection HDMI input SDI output 1 LED HDMI input status indicator SDI output 2 IR RX receiver for display connection... -
Page 6: Typical Application
HDMI IN of the TX-SDI-50 transmitter. Connect a good quality, well terminated copper -core 75Ohm WF100 coax cable of no more than 50m/164ft in length between either of the synchronous SDI OUT ports on the TX-SDI-50 to the SDI IN port of the RX-SDI-50 Receiver. - Page 7 For control of the source from display zone, connect the IR TX emitter from the TX-SDI-50 transmitter to the infrared receiver window of the source using the adhesive backing - you may need to adjust the position of the emitter eye on the source for best results.
-
Page 8: Ir/Rs232 Control Connection
Update RS232 Settings To update firmware for your device, simply connect a Serial-to-mini USB cable from the ISP port of the TX-SDI-50 / RX-SDI-50 to a computer Run VS010 are X Firmware Update batch file. When complete, remove the Serial-to-mini USB cable NOTE Devices will not transmit or receive signals while updating firmware. -
Page 9: Troubleshooting
1080p video, 7.1 Audio EDID 2) If possible, always use test equipment prior to installation and to troubleshoot any problems. See Receiver WyreStorm system testing range at wyrestorm.com Reserved for future use - no function Technical Support: support@wyrestorm.com US: +1 901 384 3575... - Page 10 AVR manufacturer’s guidelines on the correct settings distribution i.e. the cable, receiver or matrix itself. to use for your requirements. Technical Support: support@wyrestorm.com US: +1 901 384 3575 EMEA: +44 (0) 1793 230 343...
-
Page 11: Faq
What about 3D? All WyreStorm products will pass-through a 3D Blu-ray 3) Is the remote handset powered and sending a signal. signal? Note: IR is invisible to the naked eye, so use a... -
Page 12: Maintenance
HD content. Unlike competing products, – either those specified by the manufacturer or parts WyreStorm equipment are legal and comply with HDCP possessing the same characteristics as the original parts. regulations. -
Page 13: Mail In Service
Replace it with a new or refurbished product. considered the responsibility of the individual. Limited warranty period: All WyreStorm products are covered by a too year PARTS and labor warranty. During this period there will be no charge for unit repair, replacement of unit components or replacement of product if necessary. -
Page 14: Disclaimer
WyreStorm reserves the right to change software, control codes and specifications without notice. WyreStorm will not be liable for any use of this information or any changes it may make to those products. The use of this information constitutes an agreement by the user to these limitations and exclusions. - Page 15 Technical Support: support@wyrestorm.com US: +1 901 384 3575 EMEA: +44 (0) 1793 230 343...
- Page 16 US: + 901 384 3575 UK:- +44 (0) 1793 230 343 Email: support@wyrestorm.com WyreStorm Technologies reserve the right to change physical appearance or technical specification of this product at any time. Visit wyrestorm.com for the latest information on products.. REV0415A...
Need help?
Do you have a question about the TX-SDI-50 and is the answer not in the manual?
Questions and answers