Wyrestorm TX-70-4K Quick Start Manual

4k hdbaset transmitter with poh

Table of Contents

Download this manual

Table of Contents

Need help?

Do you have a question about the TX-70-4K and is the answer not in the manual?

Page 1 PDF provided by Conference Room AV WyreStorm TX-70-4K 4K UHD HDMI, HDBaseT Transmitter - 230'...
Page 2: Before You Begin
4K HDBaseT Transmitter with PoH TX-70-4K Quickstart Guide WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the installation process. Before You Begin In The Box • WyreStorm recommends visiting the product page before installing this...
Page 3: Front Panel
8-pin RJ-45 female | 10/100 Mbps auto-negotiating Ethernet Connect to a Local Area Network or network device for Ethernet pass-through via HDBaseT. Copyright © 2017 WyreStorm Technologies | wyrestorm.com North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343 2 of 4 TX-70-4K Quickstart Guide | 170804 support@wyrestorm.com...
Page 4: Wiring And Connections
Wiring and Connections WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the switcher. Read through this section in this entirety before running or terminating the wires to ensure proper operation and to avoid damaging equipment.
Page 5: Specifications
Troubleshooting Tips: • Verify that the HDBaseT cable is properly terminated per the HDBaseT • WyreStorm recommends using a cable tester or connecting the cable to Wiring section. other devices to verify functionality. • Verify that the matrix, receiving device, and display support the output •...