Download Print this page

Wyrestorm TX-35-IW-KVM Quick Start Manual

Hdmi & usb single gang in-wall hdbaset transmitter

Advertisement

Quick Links

HDMI & USB Single Gang
In-Wall HDBaseT Transmitter
TX-35-IW-KVM
WyreStorm recommends reading through this document in its entirety to become familiar with the product's features prior to starting the
installation process.
IMPORTANT! Installation Requirements
• Read through the
Wiring and Connections
guidelines before creating or choosing premade cables.
• Visit the product pages to download the latest firmware, document version,
additional documentation, and configuration tools.
Basic Wiring Diagram
Copyright © 2024 WyreStorm ProAV Corporation |
Copyright © 2024 WyreStorm ProAV Corporation |
TX-35-IW-KVM Quickstart Guide | 240503
TX-35-IW-KVM Quickstart Guide | 240503
section for important wiring
wyrestorm.com
wyrestorm.com
In the Box
1x TX-35-IW-KVM
1x 2 pin Phoenix Male Connector
1x 3-pin Phoenix Male Connector
1x Wall Plate Plastic Panel (1-gang US)
1x USB-B to USB-A host cable
1x Quickstart Guide (This Document)
INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973)
1 of 4
Quickstart Guide
support@wyrestorm.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the TX-35-IW-KVM and is the answer not in the manual?

Questions and answers

Summary of Contents for Wyrestorm TX-35-IW-KVM

  • Page 1 HDMI & USB Single Gang In-Wall HDBaseT Transmitter TX-35-IW-KVM Quickstart Guide WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the installation process. In the Box IMPORTANT! Installation Requirements 1x TX-35-IW-KVM •...
  • Page 2 On: Indicates the selected source On: Indicates link with receiving device Link LED Off: No link with receiver/powered off Copyright © 2024 WyreStorm ProAV Corporation | Copyright © 2024 WyreStorm ProAV Corporation | wyrestorm.com wyrestorm.com INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973)
  • Page 3 Wiring and Connections WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the switcher. Read through this section in its entirety before running or terminating any wires to ensure proper operation and to avoid damaging the equipment.
  • Page 4 Safety and Emission CE | FCC | RoHS | RCM | EAC | UKCA Note: WyreStorm reserves the right to change product specification, appearance or dimensions of this product at any time without prior notice. Warranty Information WyreStorm Technologies ProAV Corporation warrants that its products to be free from defects in material and workmanship under normal use for a period of five (5) years from the date of purchase.