Electronic Gate Release; Audible Alarm - Max Phantom 2000 Installation And Owner's Manual

High traffic commercial brushless dc low profile swing gate operator
Table of Contents

Advertisement

electronic gate release

Insert key on control box, turn and HOLD (in either direction) to MOVE gate.
CAUTION:
Keep pedestrians and vehicles clear of the gate while it is moving.

audible alarm

If the Alarm Sounds During Normal Gate Operation:
completing a gate cycle, the alarm will sound and the gate will PAUSE in the position where the second obstruction occurred.
CHECK THE GATE AREA FOR ANY PROBLEMS BEFORE pressing the alarm reset button on the control box to shut off the
alarm and reset the gate. NOTE: Alarm will automatically shut-off after five minutes but will not allow gate to operate until the
alarm reset button is pressed.
Some reasons why the alarm sounds:
The gate operator tries to close the gate but
gate gets CAUGHT on an object and cannot move.
40
maintenance
A FOREIGN OBJECT is on the gate frame while the gate is moving.
HINGES are TOO TIGHT or BROKEN, gate CANNOT move freely.
Gate is STUCK or BENT in an awkward position.
The gate is TOO HEAVY.
When the gate encounters TWO consecutive obstructions before
OUTSIDE Property
Moving Vehicle is Entering
The moving gate gets PUSHED by a moving VEHICLE.
s e t
R e
r m
A l a
n
t t o
B u
INSIDE Property
Gate is Closing

Advertisement

Table of Contents
loading

Table of Contents