Using The Front Panel For Adjustments - Agilent Technologies U1251A User Manual

Using the Front Panel for Adjustments

Agilent U1251A/U1252A User's and Service Guide
This section describes the procedures to perform
adjustments from the front panel.
Selecting the Adjustment Mode
To unsecure the instrument, see
for Calibration" on page 139 or
Without the Security Code"
the reference value will be indicated on the primary display.
Entering Adjustment Values
Use the following adjustment procedure to enter an input
calibration value from the front panel:
1 Use the edit keys
the primary display.
2 Use the
and the
through the digits 0 through 9.
3 Press
when done to start calibration.
Performance Tests and Calibration
"Unsecuring the Instrument
"To Unsecure the Instrument
on page 141. Once unsecured,
and to select each digit in
arrow keys to advance
7
143