Warning; Error - Otto Bock B600 Instructions For Use Manual

Malfunctions / Troubleshooting
8.1

Warning

A warning indicates a status or malfunction of one or several
components of the power wheelchair. The function of com-
ponents that have no errors is not restricted. For example, if
the connection between the controller and seat motor mal-
functions, this error will only be indicated if the user attempts
to activate the motor. However, the driving function is still
available.
8.2

Error

CAUTION
Risk of injury due to stopping the wheelchair abruptly.
In the event of communication problems in the bus system
of the control unit, the system triggers an emergency stop
to prevent any uncontrolled functions. Depending on the
source of the malfunction, it is possible to drive the wheel-
chair out of a danger zone such as road traffic after
switching the control unit on again.
If the driving function is still not available after switching
the control unit on again, the brake must be deactivated
(see Section 6.4) to switch over to pushing mode. After
the power wheelchair has triggered an emergency stop,
contact a specialist dealer as soon as possible!
Page 156
CAUTION
Risk of accidents due to uncontrolled driving charac-
teristics. Uncontrolled movements can occur during the
operation of the power wheelchair as a result of malfunc-
tions. In this case, please contact your authorised special-
ist dealer immediately.
An error affects one or several functions of the power wheel-
chair. The system is not fully operational until the error has
been corrected.
02/2009 B600