Accessories And Assembly; Battery; Charging The Battery - ehang GHOST Operating Manual

ACCESSORIES AND ASSEMBLY

BATTERY

The capacity of the GHOST Lithium Polymer (LiPo) battery is 5400 mAh, rated at 11.1v.
It uses an XT60 connector. The GHOST battery has a power management function built
in, and it should only be charged using the included GHOST charger.(59.94Wh)
Please note that the battery voltage may rise post-flight. This is normal. Do not fly the
GHOST if the battery shows less than a 30% charge.

CHARGING THE BATTERY

Battery charging diagram
(Make sure the wires are
connected correctly)
LiPo
Front view of the charger
1A 2A 3A
Side view of the charger
(Plug in the 3S balancing socket)
The 1S 2S 3S indicators will be solid red. The 4S does
not illuminate when charging the GHOST Drone battery,
as this is a 3S battery pack.
Battery type: LiPo
Charging status:
1A 2A 3A: Indicates charging amperage
(Battery charges faster with higher amperage.Please
note the suggested charge rate for the included 3S
5400mAh battery is 10 C.)
04
(Ensure that LiPo is selected)
indicates charging;
indicates fully-charged