Landing Gear; Propellers - ehang GHOST Operating Manual

LANDING GEAR

The landing gear is made from a high-strength composite material. The landing gear is
designed to support the weight of the Ghost Drone with gimbal and camera attached.
INSTALLATION
The landing gear must be installed on the GHOST Drone when the gimbal is attached.
Please note the direction of the horizontal bars when assembling the landing gear. The
proper assembly is shown in the diagram below.
Bottom Plate
Head Rear Head
Horizontal Bar Assembled Landing Gear
Front
Head
Side View Front View

PROPELLERS

GHOST uses 3-blade 8 inch fast-assemble propellers. Propeller nuts have two colors,
red andblack. Each indicates different rotating directions.
10