Accessories; Battery - ehang GHOSTDRONE 2.0 Operating Manual

ascrewdriver to tighten four copper pillars on the bottom of the aircraft.
2. Connect the gimbal wire to the P1 interface on the plate adapter.
Plate Adapter Gimbal Gimbal Wire P1 Interface Plate Adapter
3. Mount the plate adapter to the gimbal by using two screws.
Screw Bottom Board of the Gimbal Plate Adapter(Upside down)
4. Fix the gimbal base by tightening two screws on the other two copper pillars.
5. Connect the plug of the adapter cable to the plate adapter P2 interface. Connect the
other end of the cable to the aircraft.
Gimbal Plate Adapter Adapter Cable Aircraft Completed Assembly

ACCESSORIES

Battery

Improper use of battery may lead to fire, explosion or other dangers. Please be familiar
with the product before using.
The 4S lithium polymer battery is specially designed for the GHOSTDRONE 2.0, with
capacity of 4500mAh, voltage of 14.8V, charge-discharge management functionality and
a smart display screen. The battery should only be charged by EHang charger.