Propeller Guards - ehang GHOST Operating Manual

DISASSEMBLING
Keep the motor deadlocked in place with one hand and remove the propeller accord-
ing to the unfastening instructions.
WARNING
Check that the propellers and motors are installed correctly and firmly before each flight.
It is necessary to check that all propellers are in good condition before take-off. DO NOT
use any aged, deformed or damaged propellers.
To avoid injury, do NOT approach or touch the propellers or motors while they are spinning.
Be careful during propeller assembly and removal.
For a better and safer flight experience, please use original EHang propellers.
If you need to replace your propellers, please go to our website www.ehang.com

PROPELLER GUARDS

The GHOST Drone propeller guards are made from a high-strength composite material.
They are effective in preventing damage to the propellers.
Propeller Guard Assembly and Removal
To install the propeller guards, place each guard over the GHOST motor area and align
with the three, pre-drilled holes. Use three screws to secure each guard to the GHOST
Drone body. To remove, unscrew the three holding screws and remove the guard.
Completed Assembly
12