Ip Submenu - Funkwerk bintec R4100 User Manual

Defining short hold
Delay after
connection failure
X.25
Specific functions make it possible to define the characteristics for connections
to X.25 partners individually and are configured in the M
➜ ➜
X.25 ADD/EDIT A
DVANCED
➤➤
Short hold is defined to clear an unused connection automatically, i.e.
when no more user data is sent, and thus save charges. The static short hold
tells the gateway the duration of the idle time after which it is to clear down the
connection.
Static
The static short hold setting determines how much time should pass between
➤➤
sending the last user
fixed period of time in seconds.
This function enables you to set the period of time the gateway is to wait for an
attempt to set up an outgoing connection after an unsuccessful attempt to set
up a call.
The menu consists of the following fields:
Field
Static Short Hold (sec)
Delay after Connection
Failure (sec)
Table 5-3: A S
DVANCED ETTINGS
5.2

IP Submenu

The IP submenu is described below.
➜
The X.25 M
ULTIPROTOCOL OVER
defining routing settings specifically for a WAN partner.
Multiprotocol over X.25 Submenu
S menu.
ETTINGS
data packet and clearing the connection. Enter a
Description
Idle time in seconds for static short hold.
Default value is 60.
Block timer. Indicates the wait time in seconds
before the gateway tries again after an attempt
to establish a connection has failed.
Default value is 60.
menu fields
➜ ➜
X.25 ADD/EDIT
ULTIPROTOCOL OVER
IP submenu is used for
bintec User's Guide
5
27