Commonly Used Cli Commands; Amigados Command - Commodore Amiga 500 User Manual

This time, select the System drawer, and you'll see an icon for CLl . Double-
click on this CLl icon. A new window is opened, titled the NewCLl Window.
There is a prompt, with a number followed by
> ,
at which you can enter
commands . The number identifies the number CLl window set up (you can have
multiple CLl windows at one time) . Once you have saved Preferences with CLl
set on, you can open the CLl window from the System drawer without having to
reset Preferences again.
Commonly Used CLI Commands
Since this manual serves merely as an introduction to the Amiga , rather than
present CLl as a volume in this chapter, we'll just review some frequently used
AmigaDOS commands in typical applications. Reading this won ' t make you a
programmer, but it will give you a feel for using AmigaDOS with the CLl . More
in-depth CLl information and reference material may be found in the
AmigaDOS
User's Manual ,
from Bantam Books.
The commands summarized in this chapter can be used to perform the following
tasks:
AmigaDOS and the CLl 7-3