lehman Trikes Monarch II Honda GL1800 Installation Instructions Manual page 8

Disassembly
30. See Fig. 10. Remove side stand switch as-
sembly. Disconnect sensor from side stand
while stand is in the "up" position.
31. See Fig. 11. Secure sensor from turning using
the following hardware.
• (1) Original Upper Amp Mounting Bolt
• (1) Original Upper Saddlebag Washer
• (1) M6 Flange Lock Nut- CN1902
Tour Box Frame Modification
ALL MODELS
1. See Fig 1. Mark and cut tour box frame as
shown with reciprocating saw or equivalent.
2. Remove tour box frame from motorcycle frame.
And discard mounting hardware. Use touchup
paint on bottom of tour box frame where cuts
were made.
PREPARING THE MOTORCYCLE
Remove side stand
8
Fig. 10
Fig. 11
Secure sensor
Fig. 1