Latch Installation
1. See Fig. 1. Install latch assembly into trunk
using the following hardware. Leave latch
loose to move in slots.
•
(4) M6 x 16 Button Head Bolts- CB1904
•
(4) M6 Fender Washers- CW2107
2. See Fig. 2. Route latch cable through large
hole in front trunk wall. Secure grommet in
hole.
3. See Fig. 2. Route safety release cable through
small hole in front trunk wall.
4. Apply silicone around safety release cable
from inside trunk.
LATCH INSTALLATION
32
Fig. 1
Fig. 2
Safety cable
Latch cable