10. See Fig. 5 . Install OEM Honda shock
link to Lehman swingarm with original
hardware and M12 washer under nut
and torque bolt to 47 ft.-lbs.
•
(1) M12 Washer– CW2150
11. See Fig. 6. Install lower shock linkage
with original hardware and torque lower
shock bolt to 31 ft.-lbs. and linkage bolts
to 47 ft.-lbs.
12. Reinstall shock compressor to original
location on frame.
13. Install urethane and steel bushings to
ends of swingarm.
•
(4) Urethane Bushing– LB6301
•
(4) Steel Bushing– LB6303
SWINGARM INSTALLATION
SPACER (CW2150) PLACE
WASHER UNDER NUT
19
Fig. 5
USE OEM FASTENERS
TO ATTACH SHOCK
Fig. 6
USE STOCK
FASTENERS TO
ATTACH SHOCK
LINKAGE