Table of Contents
Advertisement
Disassembly
23. See Fig 7. Loosen muffler clamps. Remove
and save muffler mounting bolts and remove
mufflers. Remove and save rubber inserts from
heat shields.
24. See Fig. 7. Remove and save metal inserts
and rubber bushings from saddlebag supports.
25. Remove and save (4) nuts from heat shield on
RH muffler. Discard heat shield.
26. See Fig. 8. 2006+ MODELS Remove and
save (4) amplifier box mounting bolts. Remove
amplifier from rear fender.
NOTE: Long bolts (upper) will be reused for
brake line clamp installation and side stand
switch disabling. Short bolts (lower) will be
used for amplifier installation on trike.
27. See Fig. 9. 2006+ MODELS Remove and
save rear inner plastic fender mounting bolts.
28. Remove rear wheel with 19mm socket. Dis-
card wheel nuts.
29. Remove battery and battery box to access re-
verse module. Remove and save reverse
module. Remove mounting bracket from re-
verse module. Temporarily leave battery out
and box loose for easier access to upper shock
mounting hardware.
PREPARING THE MOTORCYCLE
Save rubber
inserts
7
Fig. 7
Save mounting
hardware
Fig. 8
Fig. 9
Hide quick links:
Advertisement
Table of Contents
