Copying Your Tapes (Dubbing) - Panasonic PV-VS4821-K Operating Instructions Manual

Table of Contents

Advertisement

Copying Your Tapes
Connection
VCR
VCR
(HiFi)
IN FROM ANT.
(HiFi)
AUDIO OUT
R
L
AUDIO IN
VIDEO OUT
VIDEO IN
Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on Recording VCR.
1
To monitor the dubbing, also connect a TV as shown.
Connect "L" and "R" AUDIO OUT terminals on Playing VCR to "L" and "R" AUDIO IN
2
terminals on Recording VCR.
In place of a Playing VCR, you can use other equipment, such as a Camcorder.
Simply connect the unit's Audio/Video outputs to the Recording VCR.
Playing (Source) VCR
1
Insert pre-recorded tape.
2
Press PLAY, then PAUSE/SLOW
3
immediately to enter PLAY/PAUSE mode.
The operation of steps 4 and 5 must be done on both
playing and recording VCRs at the same time.
4
Press PLAY to start dubbing.
Playing VCR starts playback.
5
Press STOP to stop dubbing.
To Monitor Dubbing on Your TV
1
Turn your TV on and tune to the Recording
VCR channel (CH3 or CH4).
2
Set the VCR/ TV Selector on the Recording
VCR to "VCR."
Note
• Dubbing tapes protected with Copy
Guard will have poor quality results
Caution:
Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.
44
(Dubbing)
TV
OUT TO TV
R
L
R
L
VHF/UHF
Recording (Editing) VCR
Insert blank tape with record tab.
Press INPUT to set VCR Input mode to LINE1 for
Video Input (Rear) or to LINE2 for Video Input
(Front). (See "Selecting the Input Mode" below.)
Press REC, then PAUSE/SLOW
immediately to enter REC/PAUSE mode.
Press PAUSE/SLOW to start dubbing.
Recording VCR starts recording.
Press STOP to stop dubbing.
Selecting the Input Mode
Method 1:
Method 2:
• "L1" or "L2" lights up on Multi-Function Display
(about 4 sec.) when LINE1 or LINE2 is selected.
.
• LINE1: For rear audio/video connection.
LINE2: For front audio/video connection.
VIDEO IN 2
L-AUDIO IN2-R
Front of VCR
(Audio/Video In Terminals
on the front of VCR are available)
Press INPUT repeatedly.
Channel Number <--> LINE1 <--> LINE2
Press CH
/
. Display will change as below.
1
2
3
(CABLE)
(TV)
or
LINE2
LINE1
125
69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents