Panasonic PV-VS4821-K Operating Instructions Manual page 33

*Important: If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
helps you locate certain parts
of prerecorded movies (rented or purchased).
The feature works in two ways.
• You can go to the beginning of the movie.
• You can skip from one preview to the next.
works only on cassettes
recorded in SP speed with the record tab removed.
1
Insert a cassette
without record tab.
2 Press
SEARCH
INDEX PROG. END MOVIE
SEARCH/ M/A SKIP*
ENTER INDEX NUMBER :1
to display SEARCH.
USING 1- 9 KEYS
FORWARD SEARCH :FF
REVERSE SEARCH :REW
NEXT :SEARCH M/A SK I P
EXIT :STOP
• If you inserted a cassette with the record tab or
if you selected "INDEX SEARCH" go to page 34.
3
Press SEARCH/ M/A
SEARCH
INDEX PROG. END MOVIE
SKIP twice to select
GO TO START MOVIE
MOVIE and
GO TO PREVIEW
SEARCH START : FF press
SELECT :
GO TO START MOVIE
EXIT : SEARCH M/A SK I P
or GO TO PREVIEW.
Select "GO TO START MOVIE," if you want to
advance directly to beginning of the movie.
--> continue with step 4.
Select "GO TO PREVIEW," if you want to
view the first (next) preview.
--> go to "To Search for Preview" at right.
4
Press FF
SEARCH
INDEX PROG. END MOVIE
to start searching.
SEARCHING FOR START
OF MOVIE • To cancel,
press STOP.
CANCEL : STOP
When the movie is found...
5
Press PLAY
SEARCH
INDEX PROG. END MOVIE
to start playback.
THE MOV I E I S READY
• To cancel, press
STOP.
START : PLAY
CANCEL : STOP
Ready Check List
All connections are made.
One time Setup completed.
VCR is plugged in.
TV is turned on and set to CH3, 4
or Video on TV.
To Search for Preview.
to select
You can override the operation of
PREVIEWS mode by pressing SEARCH/ M/A
SKIP during tape searching.
tape past each preview and then reversing back
to the start of the detected preview. While the
tape is reversing back, if SEARCH/ M/A SKIP is
pressed,
searching for the next preview. While searching
for the next preview, if you see the start of a
preview which you wish to watch, press SEARCH/
M/A SKIP and
immediately reverse back to the start of that
preview, instead of searching further past the
preview start point.
Once the VCR is playing a preview, press
SEARCH/ M/A SKIP to advance to the next
preview, long commercial or the start of the
movie (whichever is next).
1
Start preview searching.
1) In step 3 at left, select "Go To
PREVIEW".
2) Press .
• If you want to playback, press PLAY.
When a preview is detected, VCR
will start playback.
2
Start next preview searching.
Press SEARCH/ M/A SKIP.
• To cancel, press STOP.
PLAY
SELECT/
SET
:PLAY
:STOP
:FF
STOP
SEARCH
M/A SKIP
SEARCH FOR
works by searching the
will begin
will
33