Record On A Tape - Panasonic PV-VS4821-K Operating Instructions Manual

Record on a Tape

VCR/TV
NUMBER
keys
PAUSE/
SLOW
REC
Record using VCR controls
2 1 Insert
Select 4 Press REC
a tape.
Channel. to start
Recording.
POWER CHANNEL VCR/TV
STOP/EJECT
S-VHS S-VHS ET
VCR/TV
5 Press STOP/
EJECT to stop.
Multi Function
Display
This video recorder, equipped with the
HQ (High Quality) System, is
compatible with existing VHS
equipment. Only use those tapes with
the or mark. It is
recommended that only tapes tested
and inspected for use in 2, 4, 6, and 8
hour VCR machines be used. This
video recorder is equipped with
recording functions for both
conventional and
to enable users to select either mode.
An cassette recorded in the
mode cannot be played back
with conventional VCRs.
*Important: If a remote control button does not work
1 Insert a tape with a record tab (pg. 4).
• VCR power comes on.
"VCR" lights up on Multi Function Display.
2
Press CH
to select the channel.
• For "LINE" input, see pg. 44.
• For channels over 100, press 100 key then
STOP
press the remaining 2 digits.
3
Press SPEED
to select the record speed (pg. 4).
SPEED
SP = Standard Play
SLP = Super Long Play
CH /
• LP recording is not possible in S-VHS/ S-VHS ET
mode.
• Speed appears on-screen and
on Multi Function Display.
4
Press REC
to start recording.
• To edit out unwanted scenes, press PAUSE/SLOW
to pause, and again to resume recording.
• You cannot view another channel during recording.
5 Press STOP
to stop recording.
One Touch Recording (recording in progress),
• VCR shuts off after the preset record length.
--> each press of REC adds 30 min. to
PLAY
REW FF
the record length up to 4 hours.
REC REC
Record one station, watch another,
--> press VCR/TV
("VCR" goes out on Multi Function Display),
--> select channels at TV (recording continues).
Select channels at VCR,
--> press VCR/TV
("VCR" lights up on Multi Function Display),
--> select channels at VCR.
Notes
• Watching one channel and recording another
is NOT possible when using a Cable Box or
a Satellite Receiver.
• After 5 min. in Pause mode, VCR stops to protect tape and
video head.
systems
when pressed, press the VCR button
on the remote and try the button again.
, or number keys
LP = Long Play
19