Mts Broadcast/ Vhs Hi-Fi Stereo System - Panasonic PV-VS4821-K Operating Instructions Manual

MTS Broadcast/ VHS Hi-Fi Stereo System

Connection
Make the Audio/Video Connection as shown
on the previous page.
• You can use a TV connected to a Stereo
amplifier and speakers instead of a Stereo TV.
Receivable Broadcast Types
The following are possible audio broadcast types and on-screen displays.
The signal being received is indicated with an " " mark while the selected
audio mode is indicated with an arrow.
To display the broadcast signal being received,
--> press DISPLAY.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo (main
language) and Secondary Audio Program (sub
language) broadcasts are being received
simultaneously. Select STEREO or SAP audio
mode.
MTS Stereo broadcast
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
• If stereo broadcast is weak and display
flickers, select MONO audio mode for
possible better results.
SAP broadcast
Secondary Audio Program (sub
language) broadcast. Select SAP audio
mode for the sub language.
MONO broadcast
Normal monaural sound broadcast.
Audio Mode for Recording
1
Press SAP/Hi-Fi
to display audio mode.
(Display disappears after 5 seconds.)
2
Press SAP/Hi-Fi
repeatedly to select
STEREO
SAP
MONO desired mode.
• Refer to "Receivable
Broadcast Types"
• Arrow indicates
above.
selection.
3
Do a recording.
See page 19.
Notes
• Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard stereo tapes will
playback in monaural sound.
• To listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected to a stereo TV or an
external stereo amplifier and speakers. (See top of this page.)
• If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.
• Hi-Fi and normal audio playback volume level may differ.
R
L
VHF/UHF
STOP 1 2 : 0 0AM ABC
0 : 0 0 : 0 0
STEREO SP
SAP
MONO
ABC
STOP 1 2 : 0 0AM
0 : 0 0 : 0 0
STEREO SP
SAP
MONO
ABC
STOP 1 2 : 0 0AM
0 : 0 0 : 0 0
STEREO SP
SAP
MONO
Equipped with
Reduction for true MTS
reproduction.
Reduction is required for good
ABC
STOP 1 2 : 0 0AM
0 : 0 0 : 0 0 stereo separation and audio
STEREO SP
fidelity.
SAP
trademark, and is licensed by
MONO
®
Audio Mode for Playback
1
Start playback.
See page 18.
2 Press SAP/Hi-Fi
to display audio mode.
(Display disappears after 5 seconds.)
3
Press SAP/Hi-Fi repeatedly
to select desired mode.
H I F I ( L / R )
H I F I ( L )
H I F I ( R )
NORMAL
• Arrow indicates
selection.
TV
VCR
AUDIO OUT
Stereo Amplifier
R
R
L
AUDIO IN
R
L
OUT TO TV
DISPLAY
SAP/
Hi-Fi
®
-TV Noise
®
-TV Noise
®
is a registered
Technology Licensing.
• Select "HIFI (L/R)" or
"HIFI (L)" or "HIFI (R)"
to listen to stereo
recordings in stereo
sound.
Select "NORMAL" for
monaural sound.
29