Panasonic PV-VS4821-K Operating Instructions Manual page 24

Timer Recording Using VCR Plus+ System
Initial Setup.....
In order to use Timer Recording Using VCR Plus+ System, the Initial Setup on page 8 to 15 must be
completed for setting Clock and Channel.
Channel Setup.....
Since numbers assigned to channels found in TV Guide and selected newspapers may differ from
channels in your viewing area, you'll need to enter your local TV channel number for each
corresponding Guide Channel.
If you perform the VCR Plus+ Channel set up procedures shown below, you will be able to perform
timer recordings using the PlusCode programming number listed in your local TV listing.
To complete step 5 of setup,
do the following:
• Prepare a TV/Cable station line-up
and channels they are received on.
Also, the Guide channel numbers
assigned to your stations (found in
TV Guide and selected newspapers).
• Make a 3-column chart (see sample).
Left column
--> all stations you receive.
Middle column
--> each station's assigned
Guide channel number from
TV Guide, etc.
Right column
--> channel number on which
your TV receives the station.
SAMPLE ONLY
Channel No. on
Broadcast or Cable Assigned Guide
which my TV
station name channel No.
receives the station.
33
HBO
38
Nickelodeon
04
CBS
11
FOX
24
Manual VCR Plus+ System Channel Setup
For [VCR-TV] or [VCR-Cable Box-TV] connection only.
1
VCR C / A CLOCK
REPEAT PLAY :OFF
T I ME STAMP :ON
REMOTE WARNING :ON
AUTO SHUT- OFF :ON
S-VHS ET :OFF
IDIOMA/LANGUE : ENGLISH
VCR' S OUTPUT CH :3
SELECT :
EXIT : ACT I ON
2
VCR C / A CLOCK CHANNEL
ANTENNA : CABLE
AUTO SET
CHANNEL CAPTION
WEAK SIGNAL DISPLAY : OFF
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP
SELECT :
EXIT : ACT I ON
3
VCR C / A CLOCK CHANNEL
ANTENNA : CABLE
AUTO SET
CHANNEL CAPTION
WEAK SIGNAL DISPLAY : OFF
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP
SELECT : SET :
EXIT : ACT I ON
4
VCR C / A CLOCK CHANNEL
AUTO SET
MANUAL
SELECT : SET :
EXIT : ACT I ON
5
VCR C / A CLOCK CHANNEL
GUIDE CH RECEIVE CH
15 01 --
02 --
20
04
VCR C / A CLOCK CHANNEL
GUIDE CH RECEIVE CH
01 --
02 --
CLEAR : ADD/DLT
SELECT : SET:
EXIT : ACT I ON
To Make Corrections,
press and
change, or ADD/DLT to erase number.
6
Press ACTION twice
to end setup.
(continued)
Press ACTION*
CH
to display MENU.
Press
to select CHANNEL.
Press
to select VCR Plus+
CHANNEL SETUP, and
press to set.
Press
to select MANUAL, and
press to set.
To enter VCR Plus+ channels,
press to move cursor to right,
press to enter number,
press to set, and
press to scroll up/down.
• Repeat step 5 until list is
complete.
to move to error, then to