Panasonic OmniVisionVHS PV-V4612-K Operating Instructions Manual

Location of Controls
Remote Control Buttons
EJECT
(Ejects tape)
POWER
(Turns VCR off/on)
VCR (mode)
(Enables VCR functions)
VCR/TV
(For TV or VCR mode)
PLAY
(Plays a tape)/
FAST FORWARD/SEARCH
(Fast forwards tape/ forward
visual search)
REWIND/SEARCH
(Rewinds tape/ reverse visual
search)
STOP (Stops tape)
Remote keys
PLAY, STOP, REW, and FF
function as
operation keys when menus
are displayed.
ACTION
(Displays menu)
COUNTER RESET
(Resets counter to zero)
PAUSE/SLOW
(Displays still, frame by frame,
or slow motion picture)
SAP/Hi-Fi
(Selects audio mode for play
or record)
VOLUME UP/DOWN
(Adjusts TV volume)
Light Tower Universal Remote Control
LIGHT button: When pressed, available buttons light and selected mode button (TV, VCR, or
EJECT button: Press to eject tape. EJECT is not available during recording.
Multi Function Display
Power Indicator
Lights up when power is on.
Clock/ Status/ Channel/ Speed Display
Displays the current time. Briefly displays VCR
Montréal: 3075 Louis A. Amos, Lachine, Québec H8T 1C4 (514) 633-8684
status when a function button is pressed.
Toronto: 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 238-2181
Briefly displays the channel number, or "L1" or "L2"
Panasonic Canada Inc. Calgary: 6835 8th Street N.E., Calgary, Alberta T2E 7H7 (403) 295-3922
when a channel or line input is selected.
Vancouver: 12111 Riverside Way, Richmond, BC V6W 1K8 (604) 278-4211
5770 Ambler Drive,
Briefly displays the recording speed when SPEED is
Mississauga, Ontario L4W 2T3
K pressed.
(905) 624-5010
Printed in Indonesia
www.panasonic.ca
LSQT0538B
S1201-1052
- 8 -
V4612-K (E) Basic-1 (02-5-7) 2nd.p65 1
LSQT0538B(Basic Operations-English) - Front
Location of Controls
Front View of the VCR
LIGHT
Cassette Compartment
(Illuminates the remote)
TV (mode)
(Enables TV functions)
POWER
DSS/CABLE mode
(Enables DSS/CABLE functions)
INPUT Video
(For LINE or channel) Input
Connector
PROGRAM/VCR+
(Displays Timer Program screen)
Audio Input
NUMBER Keys
Connector
(Selects channel directly)
(L/R)
CHANNEL UP/DOWN
ADD/DELETE
(Adds or deletes a channel)
TRACKING/ V-LOCK
DISPLAY
(Displays VCR status)
TAPE POSITION
(Locates tape position)
SEARCH/ ENTER
(Sets Search System /TV channel)
MOVIE ADVANCE
(Starts Movie Advance)
SPEED
(Changes tape speed)
Rear View of the VCR
COMMERCIAL ADVANCE/
ZERO SEARCH
(Starts Commercial Advance/
Zero Search) AC Power Plug
RECORD While plugged into an AC
(Records a program, etc.) outlet, the VCR consumes
3.0 W of electrical power in
CHANNEL UP/DOWN
off condition.
TRACKING/ V-LOCK
(Selects channel/ reduces
picture noise during Play and Video Input Connector
Slow mode)
DSS CABLE) flashes 5 seconds. If no button is pressed, light goes out in 5
seconds. Also, hold down a button to confirm the selected mode (mode button
flashes) in the dark.
Video Output
Connector
Timer Indicator
Lights up when the VCR is set for a Timer
Recording, or when One Touch Recording
(OTR) is used.
Flashes when a Timer Recording is set, but
a tape has not been inserted into the VCR.
VCR Indicator
Lights up when the
VCR/TV selector is
set to VCR.
Note to CABLE system installer
This reminder is provided to call the CABLE system installer's attention to Article 820-40 of the
NEC in USA (and to the Canadian Electrical Code in Canada) that provides guidelines for
Hi-Fi Indicator proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical.
Lights up when Hi-Fi audio is
monitored in Playback Mode.
- 9 -
Reset Language, Channels, Clock, VCR's Output Channel
Press ACTION*
VCR C / A CLOCK CH
REPEAT PLAY :OFF
REMOTE WARNING :ON to display MENU.
AUTO SHUT- OFF :OFF
IDIOMA/LANGUE : ENGLISH
VCR' S OUTPUT CH :3
STOP/EJECT
SELECT :
EXIT : ACT I ON
PLAY
Language Channels Clock
1) Press to select 1) Press to select 1) Press
language item. CHANNEL.
CLOCK.
VCR C / A CLOCK CH VCR C / A CLOCK CHANNEL
VCR
REPEAT PLAY :OFF ANTENNA : CABLE AUTO CLOCK SET
REMOTE WARNING :ON AUTO SET MANUAL
AUTO SHUT- OFF :OFF WEAK SIGNAL DISPLAY : OFF TIME ZONE ADJUST : 0
IDIOMA/LANGUE : ENGLISH CABLE/DSS BOX SET UP
VCR' S OUTPUT CH :3 VCR Plus+ CH SET UP
SELECT : SET : SELECT : SELECT :
EXIT : ACT I ON EXIT : ACT I ON EXIT
2) Press repeatedly. 2) Press to select 2) Press
Remote REWIND/
"ANTENNA," then "MANUAL," and press
FAST VCR C / A CLOCK CH
Sensor SEARCH press to set . (For Auto Clock Set,
REPEAT PLAY :OFF
REMOTE WARNING :ON
FORWARD/
AUTO SHUT- OFF :OFF your antenna system select "AUTO CLOCK
RECORD SEARCH IDIOMA/LANGUE : ENGLISH
VCR' S OUTPUT CH :3 ("TV" or "CABLE.") SET.")
VCR C / A CLOCK CHANNEL VCR
SELECT : SET :
ANTENNA : CABLE AUTO CLOCK SET
EXIT : ACT I ON
AUTO SET MANUAL
WEAK SIGNAL DISPLAY : OFF
For English TIME ZONE ADJUST : 0
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP
VCR C / A RELOJ CA
REPETICION :INACT SELECT : SET : SELECT :
AVISO/CONT.REMOTO :ACT
EXIT : ACT I ON EXIT
APAGADO AUTOMATICO :INACT
LANGUE/LANGUAGE:ESPAÑOL
CANAL DE SALIDA :3 3) Press to select ("TIME ZONE ADJUST"
"AUTO SET," then appears only when
ELEGIR : FIJAR : press .
SAL I R : ACT I ON auto clock is set.)
• If you use Cable
For Spanish VCR
Box, set it to the
MAGNETO. C / A HORL. CA PBS channel in your
REPRISE LECTURE : NON
MESSAGE D' ERREUR : OUI time zone.
SELECT HOUR
COUPURE AUTO : NON
LANGUAGE/IDIOMA : FRANÇAIS
SELECT :
CA SORTIE : 3 VCR C / A CLOCK CHANNEL
EXIT
SEL. : REGLER:
3) Press
QUITTER : ACT I ON
to select and set
For French
CH AUTO SET PROCEEDING
the date, time, and
Audio Input Connector
CANCEL : STOP DST (Daylight
3) Press ACTION to exit.
(L/R)
Saving Time).
• After Channel Auto
Set is finished, Auto
4) Press ACTION to
Clock Set will be start the Clock and
VHF/UHF Antenna
performed. exit this mode.
Input Terminal
VCR's Output Channel
Add or Delete a Channel
AUDIO
IN FROM ANT. 1) Press to select
R
"VCR'S OUTPUT CH."
To add channel:
L VHF/UHF
VHF/UHF Antenna
VIDEO OUT TO TV VCR C / A CLOCK CH
Select channel with NUMBER keys and
REPEAT PLAY :OFF
Output Terminal
REMOTE WARNING :ON press ADD/DLT.
IN 1 OUT
AUTO SHUT- OFF :OFF
IDIOMA/LANGUE : ENGLISH
VCR' S OUTPUT CH :3
Audio Output
SELECT : SET :
Connector (L/R) EXIT : ACT I ON
2) Press .
VCR C / A CLOCK CH
IF YOU PRESS ACTION
To delete channel:
KEY, VCR ' S OUTPUT CH
SWITCHES TO CH 4.
Select channel with CH
keys and press ADD/DLT.
3) Press ACTION.
VCR C / A CLOCK CH
PLEASE TUNE YOUR TV TO
CH 4.
DST (Daylight Saving Time)
After 3 seconds
VCR auto adjusts clock for DST.
VCR C / A CLOCK CH
REPEAT PLAY :OFF Spring (First Sunday in April)
REMOTE WARNING :ON
AUTO SHUT- OFF :OFF DST:ON ➛ Sets clock ahead one hour.
IDIOMA/LANGUE : ENGLISH
VCR' S OUTPUT CH :4
Autumn (Last Sunday in October)
DST:ON ➛ Turns clock back one hour.
SELECT : SET :
EXIT : ACT I ON
• If your area does not observe Daylight
• To Make Corrections,
• Keep these time changes in mind when
repeat steps 1) ~ 3).
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
- 10 - - 11 -
2002/05/07, 13:59
Limited Warranty
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in
Time Zone material and workmanship and agrees to remedy any such defect for a
Adjust
to select period as stated below from the date of original purchase.
(Only when Auto Clock
VHS Video Cassette Recorder – One (1) year, parts and labour
is set.)
C / A CLOCK CH
LIMITATIONS AND EXCLUSIONS
1) Press to select
This warranty does not apply to products purchased outside Canada or to
CLOCK.
any product which has been improperly installed, subjected to usage for
VCR C / A CLOCK CH
AUTO CLOCK SET
which the product was not designed, misused or abused, damaged during
: ACT I ON MANUAL
TIME ZONE ADJUST : 0
shipping, or which has been altered or repaired in any way that affects the
to select
reliability or detracts from the performance, nor does it cover any product
SELECT :
EXIT : ACT I ON which is used commercially. Dry cell batteries are also excluded from
2) Press to select coverage under this warranty.
"TIME ZONE
This warranty is extended to the original end user purchaser only.
C / A CLOCK CH ADJUST"
A purchase receipt or other proof of date of original purchase is required
VCR C / A CLOCK CH
before warranty service is performed.
AUTO CLOCK SET
MANUAL
TIME ZONE ADJUST : 0 THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER
SET :
: ACT I ON WARRANTIES, EXPRESS OR IMPLIED, EXCLUDING ANY IMPLIED
SELECT : SET :
EXIT : ACT I ON WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
and press to
PARTICULAR PURPOSE.
subtract or add
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY
C / A CLOCK CH hour(s) as necessary.
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.
9 /29 / 20 0 2 SUN 2 : --PM
3) Press ACTION.
In certain instances, some jurisdictions do not allow the exclusion or
DST : ON
• "TIME ZONE
limitation of incidental or consequential damages, or the exclusion of implied
ADJUST" returns to
SET :
: ACT I ON "0" if clock is set warranties, so the above limitations and exclusions may not be applicable.
manually.
and
WARRANTY SERVICE
For product operation and information assistance, please contact your
Dealer or our Customer Care Centre at:
Telephone #: Fax #: Web:
(905) 624-5505 (905) 238-2360 www.panasonic.ca
For product repairs, please contact one of the following:
• Your Dealer who will inform you of an authorized Servicentre nearest you.
• Our Customer Care Centre at (905) 624-5505 or www.panasonic.ca
• A Panasonic Factory Servicentre listed below:
Richmond, British Columbia Calgary, Alberta Mississauga, Ontario
Panasonic Canada Inc. Panasonic Canada Inc. Panasonic Canada Inc.
12111 Riverside Way 6835-8 th St. N. E. 5770 Ambler Dr.
Richmond, BC V6W 1K8 Calgary, AB T2E 7H7 Mississauga, ON L4W 2T3
CHANNEL 08 ADDED
Tel: (604) 278-4211 Tel: (403) 295-3955 Tel: (905) 624-8447
Fax: (604) 278-5627 Fax: (403) 274-5493 Fax: (905) 238-2418
Lachine, Québec
Panasonic Canada Inc.
/ or NUMBER
3075, rue Louis A. Amos
Lachine, QC H8T 1C4
Tel: (514) 633-8684
CHANNEL 08 DELE TED
Fax: (514) 633-8020
CUSTOMER'S RECORD:
Customer Name:
Model Number: Serial Number:
Date of Purchase:
Dealer's Name:
Address: Phone Number:
Saving Time, select DST:OFF.
programming VCR for timer recordings. IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the
original carton. Include details of the defect claimed, and proof of date of original
purchase.
- 12 -
Video Cassette Recorder
Operating Instructions
(Basic Operations)
For advanced operations, see the separate
"Advanced Operations" instruction book.
PV-V4612-K
Model No.
Table of Contents
Important Safeguards and Precautions .................... 2
Before Using ............................................................ 3
Connections and Initial Setup (Ready to Play) ......... 4
Playback / Record on a Tape ................................... 5
Timer Recording ................................................... 6, 7
Location of Controls ........................................... 9, 10
Reset Language, Channels, Clock,
VCR's Output Channel .......................................... 11
Limited Warranty .................................................... 12
VCR Plus+ and PlusCode are registered trademarks of Gemstar
Development Corporation. The VCR Plus+ system is manufactured
under license from Gemstar Development Corporation.
E S
As an NERGY TAR Partner, Panasonic has determined that this
E S
product or product model meets the NERGY TAR guidelines for
energy efficiency.
Please read these instructions carefully before attempting to connect,
operate or adjust this product. Please save this manual.
LSQT0538B