Table of Contents
Advertisement
Owner's Manual
the system now provides information about the voice to be replaced (in the top of the screen) and the new voice
(in the middle), and a prompt for confirmation to proceed, since the new register has not yet been definitively
loaded, but has simply been rendered audible for evaluation. As the display shows, press [ENTER] to confirm
the replacement or [EXIT] to abort.
If you now go ahead with the operation, the system will definitively replace the old voice and give
confirmation with the following screen:
IMPORTANT NOTES
-
The voices for loaded for each stop are automatically saved in the current Organ Style (see also
section 5). This means that when another style is recalled, the voices will be reset to the last style
recalled. When the style in which the voices were changed is reloaded, the voices will be reset to
the latest adjustments.
-
When a replacement voice is loaded, it will be assigned the volume value set for the voice
present on the relative stop before the change was made.
-
To restore the original voices of all styles, recall the FACTORY SETTING function described in
point 9.2.
21
Chorale 8
Viscount
Advertisement
Table of Contents
