Viscount Chorale 8 User Manual page 11

Table of Contents

Advertisement

Owner's Manual
4. [REVERB VOL.] trimmer: regulates the level of the reverb digital effects.
5. [EXT.SPK] Switch: on-off switch for loudspeakers (if any) connected to the outputs on the rear
panel, powered by means of the [EXT. +12V DC] socket.
WARNING!
Do not switch the organ on and off in rapid succession. After the instrument is switched off, wait at
least 10 seconds before switching it back on.
RIGHT PANEL
1. Display: graphic display of 128x64 pixels for display of all
the screens relating to the organ's functions.
2. [FIELD ] and [FIELD ] buttons: buttons used to move
the cursor around within the display screens. The [FIELD ]
button moves the cursor to the field above (the one currently
selected) while [FIELD
3. [VALUE +] and [VALUE -] buttons: buttons for adjusting
parameters. [VALUE +] increases the value, [VALUE -]
decreases it.
4. [EXIT] and [ENTER] buttons: buttons for accessing or
exiting menu screens. [ENTER] is used to enter the menu or
function shown on the display or confirm any prompts from
the system. [EXIT] is used to exit the screen on the display
and return to the previous one, or abort any prompts from the
system.
] selects the field below.
9
Viscount
1
+
FIELD
VALUE
2
-
FIELD
VALUE
3
Chorale 8
ENTER
4
EXIT

Advertisement

Table of Contents
loading

Table of Contents