Replacing Voices And Regulating Voices Volumes - Viscount Chorale 8 User Manual

Chorale 8
Viscount
As described in the instruction to this section, it is important to remember that the Organ Styles save the status of
the following functions:
- ALTERNATIVE VOICE (voices assigned to each stop)
- VOICE VOLUME (volumes of the voices)
- REVERBERATION (type of reverb effect)
- INTERNAL EQUALIZER (equalizer for the internal amplification system)
- EXTERNAL EQUALIZER (equalizzatore per le uscite audio posteriori)
The functions described above can only be modified when a User style has been selected. Since the
Baroque, French, English and American styles cannot be edited, if the user attempts to modify these
functions the display will show:
6. REPLACING VOICES AND REGULATING VOICE VOLUMES
One important new feature of the Chorale 8 series is the capability for replacing the voices initially associated to
the front panel stops with other voices already provided in the organ's internal memory.
In practice, this gives quick, easy voice replacement, which however enables you to set your organ's
entire sound setup exactly as you wish and at any time, with considerable advantages for the customisation
of the instrument, and for its use by more than one organist (each of them will be able to have their own
set of voices). The register setup can be further adjusted to individual requirements through regulation of
the volume of each individual voice.
All voice management functions can be recalled by selecting the VOICES after the [MENU] piston is
pressed. The video page displayed is as follows:
containing the following functions:
o VOICES VOLUME: regulates the volume of the voices.
o ALTERNATIVE VOICE: used to replace voices.
To display the function required, select the relative display field using the [FIELD
buttons and press [ENTER]. Use the [EXIT] button to return to the MENU video page.
18
Owner's Manual
] and [FIELD ]