Fd 38X Custom Fold Setup - Formax FD 38X Operator's Manual

FD 38X CUSTOM FOLDS SETUP
The FD 38X has 35 custom fold settings that can be stored
into memory for recurring jobs with fold settings that vary from
the standard fold settings. To create or edit custom folds se-
lect "Custom Folds Setup" from the Program Menu screen and
press the " " button to enter. See page 13 to help determine
the new fold measurements.
1. Select the custom fold number you want to program
using the " " buttons. Press the "
enter number and advance to the next screen.
2.
The current settings for the custom fold and stacker
position will be displayed. Press the "
the settings or the "
custom fold number.
Note: All custom folds are pre-set for a standard 11"
C-fold.
3.
Adjust Fold Table screen will be displayed. Use the
" " buttons to change the upper fold table setting.
Press the " " button to enter and advance to the lower
fold table setting. Adjust the lower fold table and press
the " " button to enter and advance to Stacker Position
screen.
" button to
" button to edit
" to go back and select a different
11