Formax FD 38X Operator's Manual page 14

AutoBatch
"AutoBatch" or "automatic batch" allows you to batch count with automated features. In the Autobatch mode you can
program the number of sheets you would like to process in a set, the total number of sets and the delay between each
set. For example: you can program 10 sheets to be pulled to create a set, then program 100 sets to be processed with a
3-second time delay between each set.
1. To enter AutoBatch mode, highlight "AutoBatch"
on the "Batch Counting" screen using the "
buttons. Press the "
2.
"Sheets" is highlighted. Press the "
set the number of sheets for each set. Press the "
button to enter your selection and advance to the next
screen.
3.
"Sets" is highlighted. Press the "
select the number of sets. Press the "
enter your selection and advance to the next screen.
4.
"Delay" is highlighted. Press the "
set the time delay between each set. Press the
" " button to enter your selection and advance to the
next screen.
5.
Press the " " button to begin folding. The "
button can be pressed to edit the settings. Press the
"C" button to exit to the main screen.
NOTE: If a fault occurs during a set the set will be
completed when the fault is reset.
" button to enter.
" buttons to
" buttons to
" button to
" buttons to
"
"
"
9