Formax FD 38X Operator's Manual page 11

9. Select the type of fold desired by pressing the fold
selection button (Fig 8).
10. Press the "1x" button on the control panel to test and
check the folds. (Fig 9).
NOTE: When the "1x" or "
fold tables return to the "home" position then reposition
to the programmed setting.
11. If the fold is skewed, remove paper, lower the infeed
tray extension and turn the skew adjustment knob left
or right to make corrections (Fig 10).
12. When satisfied with the test folds, press the "
to start the folder. Press the "
13. Press the "-" or "+" buttons to adjust machine speed to
desired level.
" button is pressed, the
" button
" button to stop.
Fig. 8
Fold selection button
Fig. 9
Fig. 10
6
Test Button
Skew Adjuster