Table of Contents
Advertisement
23A-22
BODY - Seats
<Stand.rd
lellt>
The basic functions and structure are the same as
in
the power seat and the front and rear of the
seat cushion can be (8;sed and
lowered
independently
by INnual operation of the lever
Wtlfln
raisirlQ
the front 01 the seat cushion,
the
changeover
lever
is first put in the
front height
adjustment position to engage
the
height knob
gear and gear A. When the
height knob
gear is
turned
in
the
direction indicated
by the arrow in
the figure, gear A revolutions are transferred
to
the sector gear 10 the arm and the seat cushion
rises.
When
raising
the
rear
of the seat cushion,
the
changeover lever is first put in the rear height
adjustment position to engage the height knob
gear and gear e, When the height knob gear is
turned in the direction inchcated by the arrow in
the figure, the gear B revolutions are transferred,
via
a chain,
to
~ear
C to gfJar 0
to
gear E to the
sector gear
to
the arm and the
rear
cushion rises.
The
reverse
operation
is
performed 10 lower the
-,
19FOOSO
,
/
RECLINING ADJUSTMENT MECHANISM WITH MEMORY
If the seatback
is
raised after being inclined
to
the
front, it can be
returned
to tho original angle set
in
memory by previously setting the seatback angle
in memory.
Furthermore,
even after it is reclined at any
an~le,
if the seatback
is
raised after
bein~
inclined to the
front.
it can be returned to the original angle set in
~"""'.
Advertisement
Chapters
Table of Contents
