Table of Contents
Advertisement
12 If you are setting up Edit & Playback VGA output:
a
Select your desktop area from the drop-down list.
b
Right-click on monitor 2 and select Extend Main onto monitor.
c
Click Apply.
13 Click on Done and close the Catalyst Control Center and the Display
Properties dialog.
Set Up Edit & Playback Without Catalyst Control Center
If you have just the ATI drivers and no Catalyst Control Center, follow these
instructions to configure Edit & Playback output.
1
Turn on the second monitor.
2
Right-click on the Windows desktop.
3
Select Properties to open the Display Properties dialog.
4
Switch to the Settings tab.
Figure 2-8. Display Properties Settings Tab
In f oC as t er Rac km o u nt Har dw a r e In sta ll at io n M a n ua l
Chapter 2 | Installation and Setup
23
Advertisement
Table of Contents
