Table of Contents
Advertisement
Confirm the Video
Output
30
Chapter 2 | Installation and Setup
In f oC as t er R ac km o u nt H ar dw a r e In sta ll at io n M a n ua l
1
After configuring your video output, click OK to save your settings.
A warning dialog appears stating that all Harris software will shut down
and restart when exiting the InfoCaster Rackmount Configuration Utility.
Figure 2-11. Software Shutdown Warning
2
Click OK to continue with the setup. An ICConfig dialog appears asking if
you want to test your settings.
Figure 2-12. Settings Test Dialog
3
Click Yes to open the Test Pattern Output dialog.
4
Click the Start button and then OK when you see the color bars on your
output monitor.
Figure 2-13. Test Pattern Output Dialog
5
Click Yes on the Output Test dialog to confirm the color bars appeared
correctly, and to close the configuration utility.
If you did not see the color bars, return to
Device" on page 26
"Select the Video Output
to reconfigure your video output.
Advertisement
Table of Contents
