Table of Contents
Advertisement
Audio Setup Options
Enable Live Audio
Input
Enable Audio
Output
Configure the
Audio I/O
Table 2-4. Audio Channel Configuration
2-Channel
Port Color
(Stereo)
Light Blue
Line In
Lime
Line Out
Pink
Mic In
Grey
Black
Orange
If you have audio/video capture cards installed on your system, select the
Enable Live Audio/Video Input checkbox on the Video/Audio Standard tab in
the InfoCaster Configuration Utility. If you select this option, InfoCaster
enables you to use audio input from the cards within your Live Video regions.
If the capture card you wish to use is a PCI-100 or XD-200 card, select the
appropriate radio button. Otherwise, select the Third-Party Card radio button
and select the video standard from the drop-down list.
In order for your InfoCaster system to output audio, select the Enable Audio
Output checkbox on the Video/Audio Standard tab. When selected, InfoCaster
uses the default audio device currently set up within Windows.
Use the Sounds and Audio Devices control panel to change the Windows
default audio device and to configure your audio settings.
1
Select Start > Settings > Control Panel > Sounds and Audio Devices.
2
Select the Audio tab.
3
In the Sound playback section, select the audio card from the Default
device drop-down list.
4
Click the Advanced button and select the Speakers tab in the Audio
Properties window.
5
Select a speaker setup from the drop-down list.
The audio ports function changes depending on the channel configuration.
The following table lists the function of the audio ports in all configurations.
4-Channel
(Quadrophonic)
Line In
Front Speaker Out
Mic In
—
—
—
Rear Speaker Out
—
—
In f oC as t er Rac km o u nt Har dw a r e In sta ll at io n M a n ua l
6-Channel
8-Channel
(5.1 Surround)
(7.1 Surround)
Line In
Line In
Front Speaker Out
Front Speaker Out
Mic In
Mic In
—
Side Speaker Out
Rear Speaker Out
Rear Speaker Out
Center/Subwoofer
Center/Subwoofer
Chapter 2 | Installation and Setup
31
Advertisement
Table of Contents
