Table of Contents
Advertisement
Unpacking/Shipping Information
Inscriber has carefully inspected, tested, and calibrated this product prior to
shipment to ensure years of stable and trouble free service.
Before you install and configure your InfoCaster Rackmount system, follow
these steps:
1
Check equipment for any visible damage that may have occurred during
transit.
2
Confirm that you have received all items listed on the packing list.
3
Contact your Inscriber sales representative if any parts are missing.
4
Contact the carrier if any item is damaged.
5
Remove all packaging material from the product and its associated
components before you install the unit.
Keep at least one set of original Inscriber packaging, in the event that you need
to return a product for servicing. If the original packaging is not available, you
can purchase replacement packaging from Inscriber at a modest cost or supply
your own packaging as long as it meets the following criteria:
•
The packaging must be able to withstand the weight of the product.
•
The product must be held rigid within the packaging.
•
There must be at least two inches (5 cm) of space between the product and
the container.
•
The corners of the product must be protected.
If the product is still within the warranty period, Inscriber will return the
product to you prepaid after servicing.
In f oC as t er Rac km o u nt Har dw a r e In sta ll at io n M a n ua l
Preface
vii
Advertisement
Table of Contents
