Select The Video Output Device; Set The Video Standard; Set Device Output Options - Harris InfoCaster R1000 Hardware Installation Manual

Select the Video
Output Device
Set the Video
Standard
Set Device Output
Options
26 Chapter 2 | Installation and Setup
In f oC as t er R ac km o u nt H ar dw a r e In sta ll at io n M a n ua l
Select your output device from the Select Output Device drop-down list.
Depending on your system's output card, some options in the list are not
selectable.
Table 2-1. Output Devices
Device Description
Desktop Video The desktop video window displays player output in a
Window window on your system's VGA monitor. This window can
be repositioned within the desktop and can be minimized
when not in use.
This option does not require any output hardware. It is not
intended for presentation and is best used for creating and
previewing new InfoCasts.
VGA Out VGA Out displays player output on one or more external
VGA monitors. See
to learn how to set up single or multi head output.
Use the Video Standard drop-down list to select the video standard for desktop
video output. The options available depend on the output device you are using,
but generally include PAL and NTSC standards.
Note:
When using the VGA Out option, the Video Standard drop-down list
does not appear. Set your video standard for VGA Output as described
in "Configure VGA Output" on page
Depending on your output device you can customize your output options using
the available checkboxes.
Table 2-2: Device Output Options
Option Description
Use GPU Desktop Video provides a Use GPU Acceleration
Acceleration checkbox. To improve video output quality and speed,
InfoCaster can tell your video card to perform many of
the output tasks that InfoCaster would otherwise perform
itself.
Select the Use GPU Acceleration checkbox if your video
card is capable of handling advanced video output tasks.
"Configure VGA Output" on page 28
28.