Table of Contents
Advertisement
Figure 2-6. GPI Passive Switch Connection
When systems are connected through a USB port, you can set an event on one
system to trigger an event on another system. See "Use Triggers to Play Other
InfoCasts" in Chapter 6 in the InfoCaster User Guide for more information.
USB GPI triggers need to be added to the GPI list in the Configuration Utility
before they can be used in InfoCaster. See "External Triggers Tab" in Appendix
B in the InfoCaster User Guide for more information.
Chapter 2 | Installation and Setup
19
In f oC as t er Rac km o u nt Har dw a r e In sta ll at io n M a n ua l
Advertisement
Table of Contents
