Table of Contents
Advertisement
Chassis Slides
Installation
Warning
To avoid personal injury and
property damage, please adhere
to all safety steps.
12
Chapter 2 | Installation and Setup
In f oC as t er R ac km o u nt H ar dw a r e In sta ll at io n M a n ua l
The following installation procedure is for the General Devices slide assembly.
If you purchase another brand of chassis slides, follow the instructions
provided with that product.
Before you install the chassis in the rack, make sure that the chassis cover is in
place, and the slides are attached to both the chassis and the rack.
Before installing the chassis slides:
1
Ensure that the chassis covers are in place.
2
Unplug the AC power cord(s).
3
Remove all external devices and connectors.
Installing the Slides
Included in the shipping package are a pair of slide assemblies and assocciated
hardware. Each slide assembly includes an inner, intermediate, and outer slide.
The assemblies are identical, and can be installed on either side of the chassis.
1
Lift the extension lock lever to release the inner slide from its locked
position and pull the inner slide out from the assembly.
Inner Slide
(attach to chassis)
Figure 2-1. Chassis Slide Assembly
Extension Lock
Intermediate Slide
Outer Slide
(installed on rack)
Advertisement
Table of Contents
