Table of Contents
Advertisement
SBI-7228R-T2F Blade Module User's Manual
Memory Support
The SBI-7228R-T2F blade module supports up to 256 GB of RDIMM, 128 GB of UDIMM
and 512 GB LRDIMM DDR4 2133/1866/1600/1333/1066/800 MHz speed, 64GB, 32GB,
16GB, 8GB, 4GB, 2GB and 1GB size SDRAM memory in eight (8) 288-pin DIMM
sockets per node. See
on mainboard memory installation.
Hard Disk Drives
The SBI-7228R-T2F blade unit accommodates up to two 2.5" SATA/SSD hard disk
drives per node, which are mounted in drive "trays". The drives can be hot-swapped and
removed or replaced without powering down the blade unit they reside in. The four
drives can be used to set up a RAID array (RAID 0 and 1 ). These drives use a blue
color for the Blade HDD active LED. See
For RAID setup see
Installation Guides for details.
Caution: To maintain proper airflow, both hard drive bays must have drive carriers inserted
during operation whether or not a drive is installed in the tray.
WARNING: Enterprise level hard disk drives are recommended for use in Supermicro
chassis and servers. For information on recommended HDDs, visit the Supermicro Web site
at
http://www.supermicro.com/products/nfo/storage.cfm
Section 3-5: Memory Installation on page 3-9
http://www.supermicro.com/support/manuals/
Chapter 1
for information on RAID Setup.
4-8
for further details
under RAID
Advertisement
Table of Contents
