Installation - Tripp Lite B137-101 Owner's Manual

Installation

Notes:
1) Test to make sure the entire installation works properly before
2) To achieve maximum distance and performance, 24 AWG
3) The units that come in the B137-101 kit are interchangeable,
1
2
3
4
5
201004186 93-3017.indb 3
pulling cables through ceilings/walls.
solid wire Cat5e/6 cable must be used. The use of stranded
wire Cat5e/6 cable, or cable with a gauge (AWG) size higher
than 24 AWG, will result in shorter extension distance.
Higher gauge cabling, such as 26 AWG, has a more limited
transmission capability than lower gauge cabling. All
Tripp Lite N202-Series Cat6 cables are made with 24 AWG
solid wire cabling.
and can be used on either side of the installation. In the
following directions, one will be called the local unit, and the
other the remote unit.
DVD
2
Make sure the A/V source is powered OFF.
Connect the S-Video and stereo audio connectors on
one of the B137-101 units to the A/V source.
Using Cat5e/6 cable, connect the RJ45 port on the
local B137-101 unit to the RJ45 port on the remote
B137-101 unit.
Connect the remote B137-101 unit's S-Video and
stereo audio connectors to the A/V device.
Turn ON the power to the A/V source.
Cat5e/6 Cable
3
3
TV
4
5/12/2010 4:40:01 PM