Download Print this page

Honeywell HX3 Reference Manual page 4

Wearable computer
Hide thumbs


Caring for Batteries
Do not dispose of batteries into a fire. Burning will generate hazardous vapors and may cause the battery to explode. Failure to
observe this warning may result in injury from inhalation of vapors or burns from flying debris.
Do not immerse batteries in water or any other liquid. If batteries are immersed, contact Honeywell.
Do not disassemble or perform modifications to the battery. There are no user serviceable components in the battery.
Do not place battery into pocket or toolbox with conductive objects (coins, keys, tools, etc.).
A battery placed on damp ground or grass could be electrically shorted. Lay the battery on its side when not in use.
Do not store batteries above 140°F (60°C) for extended periods.
Failure to observe these warnings could result in injury or damage to the battery from rapid discharge of energy or overheating
of the battery.
Electrical Shock Hazards
The following precautions should be observed to avoid the risk of electrical shock hazards associated with charging batteries:
The HX2 Desktop Cradle has been designed for indoor use only. Do not operate outdoors or in extremely high humidity
environments. Do not expose Desktop Cradle to rain, snow or wet conditions.
Unplug the Desktop Cradle from power source before cleaning. Use only mild detergent with a slightly damp cloth to clean the
outside of the Desktop Cradle. Do not use solvents or flammable cleaners. Allow the case to dry fully before using again.
Use of attachments or accessories not recommended by Honeywell could result in fire, electric shock or injury.
This appliance must be properly grounded. If it should malfunction or break down, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment grounding
conductor and ground outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not
operate the Desktop Cradle with a damaged AC cord or plug. Honeywell does not recommend the use of any extension cord
with the HX2 Desktop Cradle.
The HX2 Desktop Cradle has been designed for use on a nominal 100 or 120 volt or nominal 220 or 240 volt circuit and has a
grounding attachment plug. The plug is an IEC configuration that is appropriate for your country and regulations. Make sure that
the appliance is connected to an outlet having a configuration similar to the plug. No adapter should be used with this
appliance. Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not
modify the plug provided with the appliance. If it will not fit in the outlet, have a proper outlet installed by a qualified electrician.
Do not disassemble the HX2 Desktop Cradle. It contains no user serviceable parts.



  Also See for Honeywell HX3

  Related Manuals for Honeywell HX3

This manual is also suitable for: